Table of Contents
Advertisement
5–2
5–2
SAN Switch Integrated/32 and Integrated/64 Installation and Hardware Guide
SAN Switch Integrated/32 and Integrated/64 Installation and Hardware Guide
Upgrading Firmware Using Web
Management Tools
The SAN Integrated Switch should be running firmware Version 2.x.x. In the event a
firmware upgrade is needed, use the following procedure.
IMPORTANT: All switch elements in the SAN must be running at the same firmware version
level, and all fabric parameters must be the same, except for the Fibre Channel IP Address and
the Domain ID.
Use the Firmware Upgrade page in Web Management Tools to download firmware
upgrades.
To download the firmware:
1. Copy the files RSHD.EXE and CAT.EXE to the root directory (for example, C) on the
host system. These files are found in
D:\DSGGB\FIRMWARE\NTINTEL\RSHD.EXE
D:\DSGGB\FIRMWARE\NTINTEL\CAT.EXE
D:\DSGGB\FIRMWARE\NTINTEL\V2.x.x
where D\ is the drive letter for the CD and version 2.x.x is the latest version of
firmware.
2. Double-click RSHD.EXE. RSHD is a server program that allows the switch to request
the firmware from the host over an Ethernet connection. Leave RSHD running in a
separate window.
3. Click the switch for which you want to upgrade the firmware. The Switch
Management Application page displays.
4. Click the Admin button on the Switch Management Application page.
5. Click the Firmware upgrade tab. The following screen is displayed.
Advertisement
Table of Contents
