Electrical Connection; Floor Level Adjustment - arcelik BEKO G91629NWU Service Manual

3.5.Electrical Connection

Connect the product to a grounded socket which is protected by a fuse conforming to the values on
the Type Label. Our company shall not be liable for any damages which may arise if the machine is
used without a proper grounding which conforms to the local regulations.
x
The connection must be in compliance with national regulations.
x
The power cable plug must be easily accessible after installation.
x
Voltage and allowable fuse protection are specified in the type label adhered to the inner part
of the appliance. If the current value of the fuse in your house does correspond to the values
specified in its rating plate, request a licensed electrician to connect an appropriate fuse.
x
The specified voltage must be equivalent to your mains voltage.
x
Do not set any connection with extension cables or multiple outlets.
WARNING: Damaged power cords must be replaced by an Authorised
Service agent.
WARNING: If the product is out of order, it must not be operated without
being repaired. Risk of electric shock!

3.5.Floor level adjustment

If your refrigerator is unbalanced;
You can balance your refrigerator by turning the front legs as illustrated in the figure. The corner
where the leg exists is lowered when you turn in the direction of black arrow and raised when you
turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will facilitate
this process.
WARNING: First disconnect the electrical connection of the product.
While the legs are being adjusted, the product must not be plugged in.
There is risk of electric shock!
36'' 3 DOORS WARDROBE TYPE REFRIGERATOR
15
NO: 00
/ REV