Multitech MultiModem iSMS SF 100-G User Manual For System Administrators page 89

HTTP Query API Format
Processing the "Send API" and sending the message takes some time. So, only an apimsgid is returned
as a response to the "Send SMS API". Query API can be used to query the status of a Send. It returns
the status of a message submitted earlier.
HTTP API format is:
http://192.168.2.1[:portnumber]/querymsg?user=xxx&passwd=xxx&apimsgid
=id
Response values:
Note: The maximum supported size of the URL is 2048 bytes.
Status Codes
Status Code
0
1
2
3
4
5
6
7
8
9
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
ID: apimsgid Status: status code
OR
ID: apimsgid Err: error code
OR
Err: error code
e.g.,
ID: 1 Status: Done
ID: 1 Err: 604
Err: 602
Status Description
Done
Done with error
In progress
Request Received
Error
Message ID Not Found
Distributed to Slave1
[10.10.10.101]
Distribution resulted in
error
Distributed among
many Slaves
API is canceled
MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
Description
The MultiModem iSMS has completed servicing the
"Send" job. The message has been successfully sent to
the Cellular network for delivery to all intended
recipients.
The MultiModem iSMS has completed servicing the
"Send" job, but the message is not sent to all the
recipients
The MultiModem iSMS is processing the "Send" API.
The MultiModem iSMS has received the "Send"
request.
Error occurred while sending the SMS from the
MultiModem iSMS.
An API Message ID does not exist.
The Master MultiModem iSMS has distributed the Job
to a given slave.
Master tried to send the job to the slaves and could
not send the job to any of the slaves as the slaves are
not available (loaded full or network unreachable)
The Master MultiModem iSMS has distributed the Job
Request among many Slaves.
Reflects that API job is dropped if the Send API job is
canceled from the WEB GUI
89