Advertisement
Quick Links
Installation And
Care Instructions
Soft Vertical Blind Collection
Cadence
®
The Paramount
Headrail System
With
®
THANK YOU for purchasing a Hunter Douglas product. Your
new blind has been custom built for you from the highest quality
materials. Once in your window, it will provide you with a lifetime of
beauty and trouble-free use.
Getting Started
•
Remove headrail, louvers and valance (if applicable) from package.
Do not discard any of the packaging material until the blind
operates to your satisfaction.
•
Check the diagram below to make sure you have the necessary
parts. NOTE: Your valance may require assembly (see Step 1).
•
Contents of your hardware package may vary depending upon
whether the headrail is mounted inside (IB) or outside (OB) the
window frame.
Outside Mount (Optional)
Adjustable Bracket
Inside Mount
(Optional)
Mounting Clip
Headrail
Wand
Control
Louvers
Tools needed for installing your blind:
•
Flat blade and Phillips
screwdrivers
•
Measuring tape
•
Pencil
•
Power drill,
1
/
" hex driver, and drill bits
4
In addition, you will need fasteners designed to work with your
specific mounting surfaces:
Mounting Surface
Wood
No. 6 Hex Head Screws
(Not Provided)
Drywall, Plaster
Wall Anchors, Expansion Bolts
(Not Provided)
Metal
Sheet Metal Screws
(Not Provided)
For assistance, call the Hunter Douglas
Customer Information Center
at 1-888-501-8364
Visit our Web site at hunterdouglas.com
Valance
Dust Cover
Valance
Valance
Hanger
(Optional)
Corner
(Right)
Assembly
Corner
Clips
(Left)
Valance
Valance
Return
Insert
Fastener
Advertisement
Related Manuals for HunterDouglas Cadence
Summary of Contents for HunterDouglas Cadence
- Page 1 No. 6 Hex Head Screws (Not Provided) The Paramount ® Drywall, Plaster Wall Anchors, Expansion Bolts (Not Provided) Headrail System Metal Sheet Metal Screws (Not Provided) For assistance, call the Hunter Douglas Customer Information Center at 1-888-501-8364 Visit our Web site at hunterdouglas.com...
- Page 2 DualFold Valance Assembly ™ • Install the valance corners and the returns. (Double Tiered) NOTE: Angle the corner as it is inserted into the louvers. Valance Valance • It is necessary to pre-assemble the DualFold Valance prior to Assembly Clip Assembly Clip headrail installation.
- Page 3 • Insert a screw through the mounting clip. Attach Louvers • Hold the valance in position and drill through the valance into ceiling. • Position a mounting clip at each hole and screw into place. Depending on your selection, you will have either right-facing louvers or left-facing louvers.
- Page 4 To Reduce Cord Length On Center Draw Blinds: Cord Tensioning • Release the tension on the cord with the cord tensioner. • Place the blind in the closed position. • Determine mounting location. If cord adjustment is required, • Locate the cord ends in the front of Center Draw refer to step 9.
Need help?
Do you have a question about the Cadence and is the answer not in the manual?
Questions and answers