Siemens SITRANS FM MAG 3100 Operating Instructions Manual page 29

Transporting
Lifting the sensor
Do NOT lift the sensor by the terminal box. Do NOT use a forklift. If available lift the sensor by
the lifting eyes fitted to the device. Otherwise lift the sensor by the process connections.
Flange devices ≤ DN 300
• Use carrying straps to transport devices with flange sizes smaller than DN 300.
• Wrap the carrying straps around both process connections when lifting the device.
• Chains should not be used, since these may damage the enclosure.
Figure 4-10
Figure 4-11
Removing the liner protectors
NOTICE
Sensors with PTFE or PFA liners only
The following information is only relevant for sensor types with PTFE or PFA liners.
SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE
WARNING
CAUTION
Incorrect transportation
Correct transportation
Installing/Mounting
4.3 Mounting
29