Entrematic Door Connect App; Entry-Exit Traffic Control ( Function To Be Used With The Entrematic Door Connect App); Flow; How It Works - DITEC DAS200T Original Instructions Manual

12. ENTREMATIC DOOR CONNECT App

If the operator is equipped with an OMS BLE, ( type COM501ES, COM501ER, COM502ES, COM502ER)
it is possible to change the mode selections withthe smartphone appENTREMATIC DOOR CONNECT.
COM501ES/ER
Installation of the app
• Download the app ENTREMATIC DOOR CONNECT, at App Store or Google Play. Make sure
to have your "VALUE DOCUMENT" ready.
• Tap the button "+ Add Door " in the app, and follow the door setup wizard. The setup wizard
will guide you how to pair the smartphone with the door.
NOTE: to be able to pair, you have to be in the range of 10 meters from the door.
13. Entry-exit traffic control ( Function to be used
with the Entrematic Door Connect App)

13.1 Flow

The Flow function ( ref parameter 3d) enables the operator to count how many people that pass
through the door, in and out. The value can be presented in the Entrematic Door Connect app.
The Flow function aids in controlling the amount of people that can enter the building. The max
restriction limit is 1000 persons.
Flow will work in all operation mode selections (except OFF which will reset the counter).
Flow Exit Only - a function that will prevent the door from opening for incoming people when the
user defined restriction limit has been reached - will work in EXIT, AUTO and PARTIAL.
For the end user to be able to change the Flow parameters, they have to use the Entrematic Door
Connect. app. Therefore it is needed that the operator is equipped with an OMS BLE (type COM501ES,
COM501ER, COM502ES, COM502ER).
In the app it is possible to set a restriction limit for Flow Exit Only. It is also possible to set value(s)
for when to receive notifications when i.e. 50% or 75% of the restriction limit is reached. Notifica-
tions are only received when connected to the operator through Bluetooth.

13.2 How it works

The system uses 3 impulses to count people. Inner impulse, Outer impulse and Presence impulse1 ( of
inner sensor). Every time the operator gets an Outer impulse followed by Presence impulse 1 the Flow
counter adds one to the counter. Every time the operator gets an Inner impulse followed by Presence im-
pulse 1 the Flow counter deducts one to the counter. Operation mode selection OFF will reset the counter.
COM502ES/ER
61