Table of Contents
Advertisement
sat-nms ACU19V rear view
No.
1
frontpanel display
2
frontpanel Keyboard
3
drive cabinet interfaces
4
analog beacon level input
3.1 Frontpanel Display
The Display together with the keyboard is your interface for local operation without using e.g. an
external computer. It shows all of the desired parameters and gives a quick overview to the actual
state of your sat-nms ACU19V. Please refer to chapter
informations.
3.2 Frontpanel Keyboard
The keyboard together with the display is your interface for local operation without using e.g. an
external computer. Besides the keyboard you find 3 LEDs that show the actual state of the ACU-
RMU (fault state / limit switch state / motor movement) Please refer to chapter
Operation
for detailed informations.
3.3 Drive cabinet interfaces
The sat-nms ACU19V contains a Vertex / General Dynamics Satcom Technologies Model 7200
compatible drive Interface. This interface commands the external driver unit to move the antenna
in 3-axis. Please refer to chapter
informations.
3.4 Analog beacon level input
For connecting a third party beacon receiver, the sat-nms ACU19V provides an analog 0-10V
interface input. If you use a sat-nms LBRX beacon receiver, the level informations as well as the
beacon frequency and alarm bits are transmitted by UDP packages via http. Please refer to
chapter
Interfaces to the antenna/ Pin descriptions
3.5 Angle encoder interfaces
The sat-nms ACU19V provides the possibility to connect two different types of angle encoders:
optical SSI encoders (S) and Resolvers (R). Please refer to chapter
descriptions
you want to have. The angle encoder type is specified by an add-on to the name of the unit. The
sequence is azimuth, elevation, polarisation An example: ACU19-SSR contains SSI interfaces at
azimuth and elevation axis and a resolver interface at polarisation axis.
(C) 2022, SatService GmbH
component
Interfaces to the antenna/Pin descriptions
for more detailed informations. You have to decide at point of order which variant
No.
component
5
angle encoder interfaces
6
alarm interfaces
7
remote interfaces
8
mains input
6 Frontpanel Operation
for more detailed informations.
www.satnms.com
for detailed
6 Frontpanel
for more detailed
Interfaces to the antenna/ Pin
ACU-19V-UM-2209 Page 8/64
Advertisement
Table of Contents
