Select Targets; Step Move; Editing Numeric Parameters - Calian SatService sat-nms ACU-19V User Manual

the menu by pressing the key
display screen appears again. If there are no keystrokes for 1 minute, the ACU automatically
leaves the menu and returns to display mode. The menu structure is shown below:
MENU
SELECT TARGET

STEP MOVE

SET AZIMUTH
SET ELEVATION
SET POLARIZATION
SET TRACKING MODE
To navigate in the menu, use
returns to the main menu level, pressing it twice returns to display mode.

6.3 Select targets

In the SELECT TARGET menu, it is possible to select a saved target. To navigate between the
targets use
After a target recall, the display returns to the main menu. Press
display or wait about a 1 minute for automatically return.
6.4 Step move
The antenna can be moved over the front panel with the STEP MOVE menu. The corresponding
keys are listed below:
7 --- Move the polarization counterclockwise
9 --- Move the polarization clockwise
8 --- Move the elevation down
2 --- Move the elevation up
4 --- Move the azimuth east
6 --- Move the azimuth east
Press a key one time, moves the antenna one step in the corresponding direction. The step size
is defined at the Web interface.

6.5 Editing Numeric Parameters

To change a numeric parameter like Azimuth, Elevation or Polarization. Here an example for the
azimuth axis: select SET AZIMUTH from the main menu.
(C) 2022, SatService GmbH
. To leave the menu, repeatedly press the key
. To select a menu press
. Press to recall a selected target.
www.satnms.com
until the
. Pressing once
to return to the default
ACU-19V-UM-2209 Page 36/64