Sat-Nms Acu-19V User Manual - Calian SatService sat-nms ACU-19V User Manual

Antenna controller
Table of Contents

Advertisement

sat-nms ACU-19V User Manual

Version 5.0.002 -- 2021-07-29 -- © 2003-2021 SatService GmbH
Abstract
The sat-nms ACU19V is an advanced automatic tracking antenna controller. It can be used
as a cost efficient antenna tracking system to replace the Vertex / General Dynamics
Satcom Technologies Model 7200 Antenna Control Unit keeping the outdoor 7150 Antenna
Drive Unit as it is. The replacement is simple plug & play by reusing the existing cables. The
system is based on the sat-nms ACU-ODM Module and provides Model 7200 ACU fully
compatible rear panel connectors in the 19inch 1RU chassis. The sat-nms ACU19V points
any antenna size precisely on the satellite and performs a fully automatic and accurate
inclined orbit satellite tracking with an improved adaptive tracking algorithm. The sat-nms
ACU19V records the tracked positions over several days and calculates based on this data
a precise mathematical model, which is used to predict the antenna position. This reduces
the step-track failures and provides continuous operation in case of a beacon receive
failure. In the Program Tracking Mode the antenna follows a path defined by a file that
contains time stamped azimuth, elevation and polarization values. These values have
usually been calculated by external software.
This document describes how to install, setup and operate this antenna controller.
Table Of Contents
1 Introduction
2 Safety Instructions
3 The sat-nms ACU19V
3.1 Frontpanel Display
3.2 Frontpanel Keyboard
3.3 Drive cabinet interfaces
3.4 Analog beacon level input
3.5 Angle encoder interfaces
3.6 Alarm interfaces
3.7 Remote interfaces
3.8 Mains input
4 Installation
4.1 Mechanical installation
4.2 Interfaces to the Antenna, Pin descriptions
4.3 Start-up
5 Operation
5.1 The Web-based User Interface
(C) 2022, SatService GmbH
4.2.1 Connector Layout
4.2.2 Pin descriptions
4.3.1 Setting the IP Address
4.3.2 Angle detectors
4.3.3 Driver Interface
4.3.4 Pointing/ Tracking
4.3.5 Backup of ACU settings
www.satnms.com
ACU-19V-UM-2209 Page 3/64

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satservice sat-nms acu-19

Table of Contents