Fourth Foldable Rear Wheel; Gps Holder And Top Handle Compartment; Inverting Rear Wheels - EAST COAST MGI zip Series User Manual

3.5 Fourth Foldable Rear Wheel

The MGI Zip X3 comes standard with a fourth foldable rear wheel.
This wheel MUST be unfolded into position at all times when the
Zip X3 is in use. This will reduce damaging the Zip X3, and provide
the ultimate in stability across all terrains. This fourth wheel should
be cleaned regularly with a cloth to ensure it can be folded as
required for storage.

3.6 GPS Holder and Top Handle Compartment

In the top handle compartment there is a position for a GPS/
mobile device holder. Open the compartment and connect the
holder into position. To open the holder always press the button
at the top of the holder. Place the GPS into the cradle, then close
the holder by squeezing the two sides closer together.

3.7 Inverting Rear wheels

The rear wheels can be inverted on the axle to reduce the size of
the Zip X3 when folded. To invert the rear wheels, press the grey
release button on the wheels hub and remove from the axle. Invert
the rear wheels so that the wheels hub protrudes away from the
axles. Press the grey release button on the wheels hub and release
once the wheel is fitted onto the axle.
MGI Zip X3 User Manual 09