Table of Contents
Advertisement
10.3 Upper and Lower Bag Strap Maintenance [See
Maintenance Schedule]
The bag straps should be replaced as per the Service Schedule.
The upper bag strap can be replaced by:
•
Removing the left and right hand straps form the upper bag
support
•
Undo and remove the screws holding the strap in position
on the bag support
•
Remove and replace both bag straps
•
Insert bag strap securing screws.
10.4 MGI Service Schedule
It is the owner's responsibility to ensure that all periodical checks,
necessary adjustments and services are carried out. If in doubt
please contact the MGI service centre:
Australia 1300 644 523
USA 1800 617 2990
Any work performed on your Zip X3 should be recorded on your
service record (see page 21) regardless of the work.
MGI Zip X3
Wipe down the Zip
X3 with a warm cloth
after each use [do
not hose]
Lubricate rear wheel
stub axles
Check and tighten
nuts and bolts
Check and tighten
handle pivots
Check alignment of
Zip X3 – ensure that it
runs straight
Replace Speed
Controller and On/
Off switch assembly
Replace rear and
front wheels
Replace upper and
lower bag straps
BO = Zip X3 owner can carry out this work
SC = Charged work to be carried by approved service centre
BO/SC = The six monthly service can be completed by either an
authorised service centre or the owner of the Zip X3.
20
Monthly
Monthly
BO
BO
BO
BO
BO
6
Every
2 yrs
Every
3 yrs
BO /SC
BO
BO
Advertisement
Table of Contents
