Table of Contents
Advertisement
7.4 Battery Level Indicator
Battery indication is located on the left side of the top box screen.
Four coloured bars are highlighted showing full charge. The
lesser number of bars displayed, means there is less battery life
available. You should always check the battery status before you
play golf to ensure the four bars are there.
7.5 Unit Measurements
You can move from meters / kilometres to yards / miles simply by
pressing the Unit Setting Button [on the right].
7.6 Distance Modes
There are three distance measurement modes. To move between
the modes by pressing the Distance Mode Button [DM] [on the left]
Distance A and B: resettable distance measurements could be
used to measure how far you hit your shot and to measure how
far you have walked for the day. To reset, simply press the DM
Button [left side] for 3 seconds until the reading displays "0".
Distance Total: cannot be reset as it is the Odometer for the life of
the Zip X3. This feature will assist with service reminders which are
recommended at each 500kms (310 miles) or 6 months periods.
7.7 Control Distance Function
The Control Distance Function enables the MGI Zip X3 to be
sent a preset distance before the Zip X3 auto stops. To use this
function:
It is recommended that you lock the front wheel to ensure the Zip
X3 tracks in a straight line.
Press and hold down Speed control button for 3-4 seconds until
the speed setting changes to 5 [metres or yards] and "ADC
MODE" will appear.
Turn the Speed control button clockwise to increase the distance
or anti-clockwise to decrease the distance until the desired
distance is achieved between 5-60 [metres or yards].
Always look ahead and assess the condition of the terrain of
where you want to send the Zip X3 prior to doing so.
Once the desired distance is reached, press the Speed control
button once to send the Zip X3 off to the desired distance.
14
Advertisement
Table of Contents
