Attaching The Rear Wheels - EAST COAST MGI zip Series User Manual

3.0 Assembling Your Zip X3

3.1 Attaching the Rear Wheels

First, lubricate both axles using the black grease cloth provided
in the box. Lubrication of the axles should be performed regularly
to keep your cart in optimal condition.
Lefthand
side
Step 1. Each wheel is labelled with L or R for left or right. This is
very important as the wheels must be placed on the correct side
of the Zip X3. Left or right sides are determined when standing
behind the Zip X3 as pictured below.
Step 2. On the wheel, press the grey release button on the wheel
hub. Place the wheel onto the axle. You will notice you need to
match up the inner female groove on the axle and the male
of the wheel. When placed in position simply release the button.
You will notice you hear a "click" when the wheel is properly
secured. To check that the wheel is properly in position pull
on the wheel. If it is properly in position it will not slide off.
Repeat for the other wheel.
MGI Zip X3 User Manual
Righthand
side
05