Battery Charging & Connection; Initial Charge; Connecting The Battery Onto The Zip X3 - EAST COAST MGI zip Series User Manual

4.0 Battery Charging & Connection
The Zip X3 is designed to take either Zip battery:
• MGI 24v 250Wh Lithium battery [Standard]
• MGI 24v 380Wh Lithium battery [Optional]

4.1 Initial Charge

• Before using your MGI Zip X3 for the first time you must fully
charge the battery overnight.
• Plug the charger AC lead into a power point - the Green LED
illuminates to indicate the charger is power on.
• Plug the charger output connection into the connector
on the front of the battery - the Red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready to be used.
Please refer to the battery charger user manual for further
information.

4.2 Connecting the Battery onto the Zip X3

Position the battery on the Zip X3 and push the battery down to
secure it.
Push the handle down to connect the battery to the Zip X3.
Your Zip X3 has been equipped with fail safe battery connection,
so the Zip X3 will not move when you connect the battery. Your Zip
X3 will only start once the speed control is switched on.
10