Start / Stop The Zip X3; Turn The Zip X3 Off - EAST COAST MGI zip Series User Manual

7.2 Start / Stop the Zip X3

Zip X3 Speed Control
Please note the following points regarding the Zip X3 Speed Control.
1. To select the desired speed, rotate the speed control button.
Turning the speed control button clockwise will increase the
speed, whilst anti-clockwise will decrease speed.
2. The speed setting chosen is displayed in the centre of the
coloured screen.
Please note you will feel notches as you rotate the speed control. The notches do not
indicate a change in speed. The speed will only increase or decrease as the number
changes in the display.
3. To start the Zip X3 at this desired speed, tap the top of the
speed control button.
4. Another tap will stop the Zip X3.
5. The desired speed can be altered up or down while the Zip X3
is moving.

7.3 Turn the Zip X3 Off

Zip X3 Battery
Please note the following points regarding the Zip X3 Battery.
Connecting the Battery onto the Zip X3
1. Position the battery on the Zip X3 and push the battery
down to secure it. Push the battery handle down to connect
the battery to the Zip X3.
2. To turn the Zip X3 Top Box Display off:
Hold down the Start/Stop Speed Control Button and Left
Hand Distance Mode Button for four seconds and the display
will turn off thereby disabling the Top Box.
Please note that the battery will still be connected to the Zip X3 and will continue
to drain whilst connected.
3. Please note that the Zip X3 display will also turn off if the
Speed Control is not operated for 30 minutes.
Once again, please note that the battery will still be connected
to the Zip X3 and will continue to drain whilst connected.
4. To reactivate the Top Box Display, whilst the battery is
connected, hold down the Start/Stop Speed Control Button
and Left Hand Distance Mode Button for four seconds and the
display will turn on thereby enabling the Top Box.
5. To fully shut down the Zip X3 and prevent the battery from
discharging, disconnect the battery by lifting its handle. The
battery can be left on or removed from the Zip X3.
MGI Zip X3 User Manual
Speed Control
13