Carrier AR TXHQB Series Owner's Manual & Installation Manual page 34

User manual/
Installation manual
If you will install the unit on the ground
or on a concrete mounting platform, do
1. Mark the positions for four expansion bolts
based on dimensions chart.
2. Pre-drill holes for expansion bolts.
3. Place a nut on the end of each expansion
bolt.
4. Hammer expansion bolts into the pre-
drilled holes.
5.
and place outdoor unit on bolts.
6.
replace the nuts.
7.
snug.
WARNING
AT ALL TIMES.
31
If you will install the unit on a wall-
mounted bracket,
CAUTION
brick, concrete, or of similarly strong
material. The wall must be able to support
at least four times the weight of the unit.
1. Mark the position of bracket holes based
on dimensions chart.
2. Pre-drill the holes for the expansion bolts.
3.
each expansion bolt.
4. Thread expansion bolts through holes in
mounting brackets, put mounting brackets
in position, and hammer expansion bolts
5. Check that the mounting brackets are
6. Carefully lift unit and place its mounting
feet on brackets.
7.
8.