Install Drain Joint; Anchor Outdoor Unit - Carrier AR TXHQB Series Owner's Manual & Installation Manual

Before bolting the outdoor unit in place, you
must install the drain joint at the bottom of
types of drain joints depending on the type
of outdoor unit.
If the drain joint comes with a rubber seal
(see
1. Fit the rubber seal on the end of the
unit.
2. Insert the drain joint into the hole in the
base pan of the unit.
3. Rotate the drain joint 90° until it clicks in
place facing the front of the unit.
4. Connect a drain hose extension (not
If the drain joint doesn't come with a
rubber seal (see
1. Insert the drain joint into the hole in the
click in place.
2. Connect a drain hose extension (not
from the unit during heating mode.
Base pan hole of outdoor
unit
Seal
Seal
Drain joint
In cold climates, make sure that the drain
the unit.
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the
mounting feet. Prepare the installation base
of the unit according to the dimensions
Air inlet
Air inlet
W
User manual/
Installation manual
A
Air outlet
H
30