Table Of Contents; Symbols; About This Manual - Festool CTC MIDI I Instructions Manual

Contents
1 Symbols....................................................... 7
2 About this manual....................................... 7
3 Safety warnings...........................................8
4 Intended use..............................................11
5 Technical data........................................... 11
6 Functional Description..............................12
7 Preparations..............................................12
8 Battery pack.............................................. 13
9 Commissioning..........................................13
10 Connecting a device.................................. 14
11 Settings......................................................15
12 Working..................................................... 15
13 Remote control..........................................17
14 Warning signals.........................................18
15 Service and maintenance..........................18
16 Transportation...........................................19
17 Environment.............................................. 19
18 General information.................................. 19
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
warnings.
Read the operating instructions and
safety instructions.
Wear a dust mask.
WARNING! The machine may contain
hazardous dust!
Do not climb on the unit
Inserting the battery pack
2

About this manual

Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
DANGER Description of imminent hazard and failure to avoid hazard will result in death.
WARNING Description of hazard and possible resulting injures or death.
Removing the battery pack
Tip or advice
Handling instruction
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 18.2
W watt
h hour
min minutes
s seconds
kg kilograms
Pa pascal
dB decibel
V volts
A amperes
Hz hertz
~ a.c. alternating current
d.c. direct current
n no load speed
0
Class II construction
rpm
revolutions per minute
min -1
'' inch
lbs. pound
diameter
to protecting your safety and preventing prob­
lems. The symbols below are used to help you
recognize this information.
English
7