Loading & Unloading Cones - STM MINI-ROCKETBOX PLUS+ User Manual

LOADING AND UNLOADING CONES
LOADING CONES
Always use good quality paper cones and discard all
papers that appear to be defective.
Place the Bottom Tray into the Loading Box.
Carefully drop cones into the Bottom
Tray. Discard any cones that appear
bent, crushed, or otherwise defective.
Add the Top Tray. Lift the trays
together and carefully place into the
Mini-RocketBox™ PLUS+.
UNLOADING CONES
Once the cycle in the Mini-RocketBox™ PLUS+ is complete,
it is safe to unscrew the wingnuts, remove the washers,
and remove the combined trays.
Remove trays and place into Loading Box.
Set the Top Tray aside.
Remove the Bottom Tray from the Loading
Box. Carefully place it onto the Finishing
Base. The Finishing Base pushes the cones
upwards for easier ejection and closing.
10