Related Manuals for STM ROCKETBOX
Summary of Contents for STM ROCKETBOX
- Page 1 ROCKETBOX TRAINING MANUAL Sesh Technologies Manufacturing, LLC. Tech/Deliveries: 509.204.3148 www.stmcanna.com...
- Page 2 RocketBox Training Manual Table of Contents Page 2-4 ROCKETBOX PICTURES Page 5 TURNING ON THE ROCKETBOX Page 5 HOW TO USE THE PLC Page 6-7 WHAT THE PLC ICONS STAND FOR Page 7 EMERGENCY STOP Page 8 LOADING/UNLOADING STATION Page 9-10...
- Page 3 RocketBox Training Manual E-Stop PLC Arm RB Handle RB Skin RB Caster Wheels Wing Nuts Washers...
- Page 4 RocketBox Training Manual RB Flaps RB Guide Rods RB Shake Box RB Crown LS Guide Rods LS-Loading Station LS Feet...
- Page 5 • The on/off switch is located on the side of the machine that has the PLC. • Turn the switch so that it is pointing up and down. This will turn the RocketBox • At this point the PLC should turn on and show the main menu screen which...
- Page 6 RocketBox Training Manual How to operate the PLC • This icon represents the home screen which also can be called the main menu screen. • Anytime that you need to go back to the main menu, this will be the icon you press.
- Page 7 • This icon represents the Service Page. It allows you to see how long the motor has been running for since you have received the RocketBox. • When this icon is pressed it will take you to another screen that shows how long the machine has been running for in hours.
- Page 8 RocketBox Training Manual Loading/Unloading Station • Screw in the four feet into the bottom of the box. • Set the station on a level surface. • On the right side of the box is a black knob that will allow you to move the base plate inside of the station, for when you want to load your cones and unload your cones.
- Page 9 RocketBox Training Manual Trays There are five different trays that are available for the RocketBox: There are cones that we know will work with these trays (confirm paper size and manufacturer with us for correct tray) .5 gram (achieve up to .5 gram) .7 (achieve .5-1.0 gram)
- Page 10 • The top tray funnels will go into the cones to help funnel the material into the cone. • Before you set the trays into the RocketBox, make sure that the shaker box in the machine is in the DOWN position.
- Page 11 RocketBox Training Manual • Take the wing nuts that come with the RocketBox and tighten them down on the guide rods till you feel tension. Turn about a quarter to half a turn after you first feel tension. If the machine seems loud you can tighten the trays more.
- Page 12 • Lift trays out of the RocketBox and place them in the unloading station. • The top tray should sit on the four rods that are in the corners of the box.
- Page 13 RocketBox Training Manual Knowledge Review Test 1. What type of electrical plug does the RocketBox come with? 2. What is the max amperage that the RocketBox will draw? A. 20 Amps B. 30 Amps C. 25 Amps D. 15 Amps 3.
- Page 14 RocketBox Training Manual 8. What does this button do on the RocketBox? 9. Which three icons appear on the bottom of the PLC screen when the RocketBox is turned 10. What type of tray is each of the following: 11. How can you differentiate a one-gram tray from a half gram tray? 12.
- Page 15 RocketBox Training Manual 13. What is the purpose of the top tray? 14. When loading and unloading the trays in the RocketBox, in what position should the shaker box be? 15. When adding your cannabis to fill your cones, it should be ground down to a powder like consistency.
- Page 16 Extent of Warranty: Any STM system properly returned to STM will be repaired or replaced by STM. STM is not responsible for any other expense incurred by the customer under the terms of this limited warranty, nor is STM responsible for any damages either consequential, incidental, special, contingent or otherwise;...
- Page 17 Liability: The purchaser of any parts releases the manufacturer of those parts and STM from all liabilities pertaining to use of the parts. The purchaser recognizes that any alteration or modifications to any STM system may increase the risk of accident and/or injury and may also render the machine inoperable.
- Page 18 RocketBox Training Manual deemed defective, which is solely at STM’s discretion, we will issue you an RMA # which you will need to place in and on the package. After receiving your RMA #, you may send the item to: STM Canna 3223 North Market St.
Need help?
Do you have a question about the ROCKETBOX and is the answer not in the manual?
Questions and answers