CONTENTS IN THE BOX DIAGRAM WARRANTY SAFETY TECH SPECS POWER SWITCH AND START UP TOUCH SCREEN INTERFACE OPERATION CONNECTING fusionX TO YOUR COMPUTER CLEANING OPENING THE BARREL REMOVING THE BARREL FROM THE BASE CHANGING THE NOZZLE MIXING/BLENDING LUBRICATION BARRREL JAM...
Page 3
1. b DIAGRAMS Thermocouple 1 Barrel Hopper Nozzle Touch Screen Power Socket Quick Power-Off Power Switch USB Connection 33cm 67.5cm 24cm Barrel (top) Screw Blending Blades Heat Sink Barrel (bottom)
1. c WARRANTY 1. e TECH SPECS • Equipment manufactured by Noztek carries the - 1000w rectangular ceramic heater (max tempera- standard machine tool guarantee of freedom ture 500c) from defects in workmanship and material for one - DAK Nozzle Band Heater 35D 25L 230-250V max year from date of shipment.
2. b TOUCH SCREEN INTERFACE 1 - HOME This screen shows all your settings, and appears red to begin with as nothing has been set. As you define settings, the corresponding boxes will turn green to show that they are ready to go. Press MENU to begin.
Page 6
5 - SET SPEED This sets your extrusion speed. Maximum speed is 17rpm 6 - SET TIMER This represents the time you want to extrude the mate- rial. The machine will run for this set time once you have switched on the motor. If no value is entered here, the machine will run until you manually end the run your- self.
When cleaning in situ, please use the fusionX pro- 2 - Connect the fusionX machine to the laptop with tective cover provided to protect the main body a USB cable. of the machine from any chemicals used in the cleaning process.
(set to 24Nm). and tighten the For materials that require more extensive blending, nozzle holder again at 24 Nm. the Noztek Pelletiser can be utilsed to cut the fila- ment in order to be reinserted back into the unit. 4. b...