Advertisement
Quick Links
Advertisement
Related Manuals for Noztek fusionX
Summary of Contents for Noztek fusionX
- Page 1 © Noztek.com 2021. All rights reserved USER MANUAL...
- Page 2 Colour Mixing Maintenance/Lubrication Barrel Jam IN THE BOX fusionX - fully assembled Accessories: Hopper weight - This can be used to press the material in the hopper into the feed section of the screw and is especially useful when using light powdered materials Torque wrench - Used to tighten and loosen the bolts on the front and top of the block.
- Page 3 DIAGRAMS thermocouple 1 barrel nozzle hopper touch screen power socket (IN) power switch quick power-off USB connection 33cm 67.5cm 24cm...
- Page 4 WARRANTY TECH SPECS • Equipment manufactured by Noztek carries the - 1000w rectangular ceramic heater (max tem- standard machine tool guarantee of freedom perature 500c) from defects in workmanship and material for - DAK Nozzle Band Heater 35D 25L 230-250V one year from date of shipment.
- Page 5 USER INTERFACE 1 - HOME This screen shows all your settings, and appears red to begin with as nothing has been set. As you define settings, the corresponding boxes will turn green to show that they are ready to go. Press MENU to begin.
- Page 6 5 - SET SPEED This sets your extrusion speed. Maximum speed is ______ 6 - SET TIMER This represents the time you want to extrude the material 7 - HOME (READY) When you see that all boxes are green, you are ready to extrude.
- Page 7 2 - Connect the fusionX machine to the laptop with a The cover has been custom made for the machine, USB cable. please place each tab between the cables and fixtures underneath the barrel and the motor (back...
- Page 8 Copper grease (provided) : When reassembling the block it is advisable to coat the thread with this anti seize copper solution. All our fusionX extruder's are shipped with three sets of hardened cutting blades. Usually these are placed Please also make sure both block surfaces are in sequence within the block.