Engine Oil Check; Selection Of Engine Oil - Kia G6DB-3.3 Manual

LUBRICATION SYSTEM
ENGINE OIL
EAA26A7C
1. Check engine oil quality.
Check the oil for deterioration, entry of water, discol-
oring or thinning.
If the quality is visibly poor, replace the oil.
2. Check engine oil level.
After warming up the engine and then 5 minutes after
the engine stop, oil level should be between the "L"
and "F" marks on the dipstick.
If low, check for leakage and add oil up to the "F" mark.
Temperature range
anticipated before
next oil change
- 7
- 13
NOTE
For best performance and maximum protection of all
types of operation, select only those lubricants which
:
• Satisfy the requirement of the API classification.
• Have proper SAE grade number for expected am-
bient temperature range.
Lubricants that do not have both an SAE grade num-
ber and API service classification on the container
should not be used.
www.CarGarage.ir
20W
- 50
19.4
8.6
www.CarGarage.ir
NOTE
Do not fill with engine oil above the "F" mark.

SELECTION OF ENGINE OIL

Recommended API classification : Above SJ or SL
Recommended SAE viscosity grades : 5W-20
If 5W-20 engine oil is not available, 5W-30 or secondary
recommanded engine oil for corresponding temperature
range can be used.
Recommended SAE viscosity number
10W
15W
- 30
- 40
5W
- 20
- 30
EMA -91
SBLM16108L