Omron E63-WF Manual

Direct Discrimination Unit
E63-WF

Detects the Rotary Encoder Direction

• Input phase difference signal from the Encoder to detect the
direction of rotation.
• High-speed response at 120 kHz.
• Mounts to DIN Track. Thin design enables superb mounting
efficiency.
• Front-panel switch enables reversing phase Z logic. Enables
connecting either voltage outputs or open-collector outputs.
Be sure to read Safety Precautions on
page 3.

Ordering Information

Power supply voltage Output configuration
12 to 24 VDC Open-collector output

Ratings and Specifications

Direct Discrimination Unit
Item Model
Power supply voltage
Current consumption
Input signal
Phase difference
ON
Input OFF
Input short current
Max. applied voltage 30 V max.
Input impedance
Output signal
Output configuration Open-collector output
Output
Output capacity
Maximum response
frequency
Output response time
Indicators
Ambient temperature range
Ambient humidity range
Vibration resistance
Shock resistance
Connection method
Material
Weight (packed state)
Accessories
Model
E63-WF5C
[Refer to Dimensions on page 4.]
12 VDC −10% to 24 VDC +15%, ripple (p-p): 5% max.
50 mA max.
Phases A, B, and Z (phase difference signals)
90° ±45° max.
6 mA max. at 0 to 2 V
1.5 mA max. at 8 to 24 V
9 mA
Approx. 1 Ω
UP/DOWN (direction detection), COUNTS output (count), OUT Z
Applied voltage: 30 VDC max.
Sink current: 80 mA max.
Residual voltage: 1 V max. (at sink current of 80 mA)
Residual voltage: 0.4 V max. (at sink current of 20 mA)
120 kHz
2 μs max.
Power indicator (red), Phase Z output indicator (green)
Operating: −10 to 55°C (with no icing), Storage: −25 to 80°C (with no icing)
Operating/Storage: 35% to 85% (with no condensation)
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
2
Destruction: 300 m/s 3 times each in X, Y, and Z directions
Terminal block
Case: ABS
Approx. 100 g
Instruction manual (S3D8 Connector is not provided.)
E63-WF5C
CSM_E63-WF_DS_E_4_3
1