Advertisement
Quick Links
Advertisement
Related Manuals for Texas Instruments AM57 Series
Summary of Contents for Texas Instruments AM57 Series
- Page 1 AM57x UART Download SOP TI Rio 2016/11/1...
- Page 2 Outline. • 1. HW/SW required stuffs. • 2. HW setting. • 3. SW setting. • 4. Demo SOP...
- Page 3 This is the AM57 GP EVM...
- Page 4 Check the GP EVM version is beyond A2...
- Page 5 Connect the J3/J4/J6 to [1:2]...
- Page 6 Connect the J5...
- Page 7 HW Required Stuffs. • Connect the J3/J4/J6, set them as [ :3] (connect the 1:2 for each) • Connect the J5 • Plug the UART to PC/NB...
- Page 8 SW Required stuffs • Windows Perl download: – Win7. – ActivePerl (x86) – TeraTerm. – serial-boot.pl Script for UART download required for AM57. • uBuntu Perl download. – uBuntu 12.04 – Perl for uBuntu – SerialPort package – serial-boot.pl ...
- Page 9 Window Perl to make the UART download procedure...
- Page 10 SW Required Stuffs • Activeperl – With 64bit OS windown7, we choose the AtivePerl (x86). – Due to the ActivePerl (x64) is not working on win7. – http://www.activestate.com/activeperl/downloads...
- Page 11 Start to follow the steps to operate the perl Trigger Perl Package Manager PPM will bring this screen. Install the “serialport” Don’t forget to click “install” Serial port is ready for used by perl.
- Page 12 Config the right comport used by perl...
- Page 13 The perl UART download complete log…...
- Page 14 Then, after seeing “CCCC”, trigger “ymodem” to send the “u-boot.im)
- Page 15 Once “u-boot.img” is download complete, the kernel will bring up natually.
- Page 16 Success !!
- Page 17 uBuntu Perl to make the UART download procedure...
- Page 18 Find the right UART-USB comport that AM57 used. Input this command: ./serial-boot.pl -p /dev/ttyUSB0 -s u-boot-spl.bin -d1 -t40...
- Page 19 It will show download complete for the “u-boot-spl.bin”!! Note: The screen might be ilde, please press “enter” to let it go on.
- Page 20 Then, continue to download the u-boot.img by inputting this command: sx -kb --ymodem u-boot.img < /dev/ttyUSB0 > /dev/ttyUSB0...
- Page 21 Then, it will runs complete. Just wait the AM57 boot screen !! Success !