Charging Curve Selection - NDS POWERCHARGERPRO PFC0150-12CH10S User Manual

5. CHARGING CURVE
SELECTION
POWERCHARGERPRO can charge Lead/Acid (AGM,
Gel, Wet) and Lithium (LiFePO ) batteries depending
4
on the model.
The charging curve must be selected according to the
battery type; to set it it is necessary to act on the Dip
Switch selectors located internally.
To access the Dip Switch selectors it is necessary to
remove the plastic cap located on one side of the
POWERCHARGERPRO as shown below
1 2
Once the plastic cap has been removed, act gently on
the Dip Switch selectors selecting the desired curve as
shown in the tables below.
24