List Of Lcp Errors - Danfoss VLT CDS 803 Programming Manual

Troubleshooting

4.6 List of LCP Errors

LCP errors are not warnings or alarms. They do not affect the operation of the frequency converter. Illustration 4.1 shows an
LCP error on the LCP.
4 4
Illustration 4.1 LCP Error Example
LCP error code
Err 84
Err 85
Err 86
Err 88
Err 89
Err 90
Err 91
Err 92
Err 93
Err 95
Err 96
Table 4.4 LCP Error List
74
VLT
Error 84
LCP comm. lost
Setup 1
Error message
LCP comm. Lost
Key disabled
LCP copy failed
Data not compatible
Read only
Database busy
Parameter invalid
Exceeds limits
Motor is running
Not while running
Password rejected
Danfoss A/S © 06/2019 All rights reserved.
®
Compressor Drive CDS 803
Communication between the LCP and the frequency converter is lost.
The LCP key is disabled. One of the LCP keys has been disabled in parameter group
0-4* LCP Keypad.
Data copy failure. This error occurs when data is copied from frequency converter to
LCP, or from LCP to frequency converter (parameter 0-50 LCP Copy).
LCP data incompatible. This error occurs when data is being copied from LCP to
frequency converter (parameter 0-50 LCP Copy). The typical reason is that data is
moved between frequency converter and LCP that have major software differences.
Parameter read only. An operation is issued via LCP to write a value to a parameter
that is read-only.
The parameter database of the frequency converter is busy.
The parameter value that is input via the LCP is invalid.
The parameter value that is input via the LCP exceeds limits.
The LCP copy operation cannot be performed when the frequency converter is
running.
The parameter cannot be changed while the frequency converter is running.
The password that is input via the LCP is incorrect.
Description
MG18P202