Advertisement
Quick Links
Original BMW Accessories.
Installation Instructions.
Retrofit LED headlights
BMW X5 M (E 70), X6 and X6 M (E 71)
Retrofit kit number
63 13 2 297 442
Installation time
The installation time is approx. 3.75 hours. This may vary depending on the condition of the car and the
equipment in it.
In addition, the installation time is increased:
- when exchanging the footwell module (cars built before 10/10 only) by approx. 0.5 hours.
- when exchanging the high-pressure jets of the headlight cleaning system (cars built before 4/12 only) by a
further approx. 0.75 hours.
The installation times specified do not include the time spent on programming/coding.
The calculation of the total costs for the programming time must be factored into the calculation of retrofitting costs
(no invoicing via warranty).
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for
mechanical work and 1.0 hour for electrical work.
To avoid unnecessary extra work and/or costs, send an inquiry straight away to the technical parts support team via
the Aftersales Assistance Portal (ASAP).
Quote the following information:
- Chassis number,
- Retrofit kit part number,
- A detailed description of the problem,
- Any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are provided via ASAP!
Pictograms
Denotes instructions that draw your attention to dangers.
!
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or warning text.
© BMW AG, Munich
© BMW AG, Munich
Retrofit kit LED technology headlights
01 29 2 320 769
01 29 2 320 769
05/2012
05/2012
(T/Z/Z)
(T/Z/Z)
1
Advertisement
Related Manuals for BMW 63 13 2 297 442
Summary of Contents for BMW 63 13 2 297 442
- Page 1 These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
- Page 2 Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this will not be reimbursed by BMW AG. Additional cables/lines that you install must be secured with cable ties.
-
Page 3: Table Of Contents
Wiring diagram ................13 © BMW AG, Munich... -
Page 4: Parts List
Right high-pressure jet of the headlight cleaning system (not supplied in the retrofit kit) Left high-pressure jet of the headlight cleaning system (not supplied in the retrofit kit) Footwell module (not supplied in the retrofit kit) © BMW AG, Munich 01 29 2 320 769 05/2012... -
Page 5: Preparatory Work
Also for cars built before 10/10 Exchanging the footwell module 61 35 115 Also for cars built before 4/12 Exchanging high-pressure jets of the headlight cleaning system, left and right 61 67 100 © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z) -
Page 6: Connection Diagram
PIN 8 Socket contact 31E<2 BR/SW Cars without SA 524 only X13420 0.75 mm² On LED headlight left C PIN 11 Cars with SA 524 only Insulate and tie back © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z) -
Page 7: Installation And Cabling Diagram
Retrofit wiring harness LED headlight, right LED headlight, left Front fuse holder A4010, plug X11003 Footwell module A4011 Earth post connection X1108 Rubber grommet bulkhead right Rubber grommet bulkhead left © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z) -
Page 8: Installing And Connecting The Retrofit Wiring Harness
- Connect branch A8, WS/GN cable, to PIN 37 of plug X14261 - Connect branches A9–A10, GR/BR cable, with minia- ture connector D to GR/BR cable from PIN 49 of A7-A8 plug X14261 071 0243 Z © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z) - Page 9 X13421 of the right headlight. A1-A4 X13421 071 0247 Z Route branches A12–A15 along the standard wiring harness to plug X13420 of the left headlight. A12-A15 X13420 071 0246 Z © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z)
- Page 10 - Branch A1, GR/BR cable, to PIN 5 - Branch A2, WS/BL cable, to PIN 6 - Branch A3, GE/SW cable, to PIN 8 Insulate branch A4, BR/SW cable and tie back © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z)
- Page 11 - Branch A12, GR/BR cable, to PIN 5 - Branch A13, WS/GN cable, in PIN 6 - Branch A14, GE/RT cable to PIN 8 Insulate branch A15, BR/SW cable and tie back © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z)
-
Page 12: Concluding Work And Coding
- If using ISTA/P, please note the instructions in the ISTA/P application documentation - Check the function of the LED headlights - Re-assemble the car appropriately - Adjust the headlights according to ISTA No. 63 10 004 © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z) -
Page 13: Wiring Diagram
All the designations marked with an asterisk (*) apply only to these installation instructions or this wiring diagram. Cable colours Blue Grey Bordeaux (Burgundy) L-GN Light green Black Brown Natural Transparent Yellow Orange Violet Green Pink White © BMW AG, Munich 01 29 2 320 769 05/2012 (T/Z/Z)