Muting The Buzzer; Backlight - Honeywell HERMetic UTImeter Gtex Chem IIC Operation And Service Manual

8.4. Muting the buzzer

When in measurement mode it is possible to mute the buzzer.
Press on "-",
-
Press on "-" again to reset the buzzer.
-
IMPORTANT NOTE: in order to prevent any misuse of the equipment, there is an automatic reactivation of
the buzzer each time the medium changes (air to liquid, liquid to water, etc.) or after 5 minutes muting. To
keep the buzzer muting, press again on "-".

5.4 Backlight

Refer to Figure 9-6.
When in measurement mode press "enter": this switches on the backlight. After around 10 seconds, the light
switches off automatically to save the battery life.
50489/GTEX Chem IIC/1805
ON
Buzzer OFF
- / medium / 5 min
auto
Backlight ON
Figure 9-6
UTImeter
Ver x.xx
Battery
97%
Init.
*********
-
E
25.94 ° C
33
UTImeter Gtex Chem IIC