Time Of Day; Display Contrast; Display Brightness; Demo Programme - Miele PT 7186 Vario XL Commissioning, Programme Chart And Settings

Settings/Supervisor level menu

Time of day

First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
– 24 h clock or 12 h clock
Once the clock display has been
selected, the time of day can be set.
To set the time (of day):
^ Use the multi-function selector to
select the current hour and confirm
your selection.
^ Use the multi-function selector to
select the current minutes and
confirm your selection.
– Time not displayed
If Delay start is activated (see
Settings Delay start), then the timer
will only show the option Start in or
Finish in in hours/minutes.
28

Display contrast

Display brightness

There are ten different display
contrast and display brightness
settings.
The bar chart shows you the setting.
– Factory default: a medium setting.

Demo programme

This can be used by dealers to
demonstrate the tumble dryer in their
showrooms.
The controls are operated in the same
way as they would be in normal use.
However, the tumble dryer will not heat
up, and fault messages and the
operating hours counter will not be
displayed.
– Off (factory default)
– On
^ To switch on or off, press OK until
information is displayed.