Advertisement
Quick Links
Advertisement
Related Manuals for TAKT Curve Coat Rack T21
Summary of Contents for TAKT Curve Coat Rack T21
- Page 1 Building Instructions...
- Page 2 Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force. 30cm version: 1x rack 3x knobs 60cm version: 1x rack 6x knobs 90cm version: 1x rack 9x knobs...
- Page 3 Screw 30cm 60cm 90cm Shelf Plug 30cm 60cm 90cm Shelf Dowl screw 30cm 60cm 1x Allen key (SW4) 90cm Shelf 1x Torx key (TX15)
- Page 4 Product Information ‘T21 Curve Coat Rack’ is a coat rack designed for indoor use. The coat rack is tested according to EN-16121 - Weight Materials 90cm version: Rack: Solid wood 720 g Knobs: Solid wood Shelf: Solid wood 60cm version: Surface treatment: Water based lacquer 480 g Fittings: Steel...
- Page 5 Dimensions 900 mm 52 mm 600 mm 300 mm 280 mm 170 mm...
- Page 6 x7 / x4 / x1...
- Page 7 Optional Shelf The shelf can be mounted on the 90cm and 60cm wide coat rack. The shelf can be positioned in any of the knob holes except for the outermost holes as these are intended for the wall mounting.
- Page 8 Find the desired height above the fl oor. Place a spirit level on the top edge of the coat rack. Mark the drilling marks through the outermost knob holes.
- Page 9 Two plugs are provided for mounting in hard walls - eg. concrete or brick walls. Drill the holes at the drilling marks and place the plugs.
- Page 10 Important! Screw the dowl screw into the wall until it reaches the blank part.
- Page 11 Place the coat rack on the dowl screws. Gently hand tighten the knobs until the coat rack is fl ush with the wall.
- Page 12 Screw the dowl screw into the wall until it passes the blank part. If you have mounted a shelf on the coat rack you will have three excessive knobs. These can be mounted freely on a wall using the provided plugs and dowl screws.
- Page 14 Warranty Spare Parts Recycling & Disassembly TAKT provides an ex- TAKT offers spare parts We hope that your TAKT tended warranty of 5 for ‘T21 Curve Coat product will serve you well years on ‘T21 Curve Coat Rack’. Spare parts are for many, many years.
- Page 15 dowl screw (metal) screw (metal) plug (plast) knob (wood) optional shelf (wood) rack (wood)
- Page 16 taktcph.com...