Page 2
Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force.
Page 3
4x screws 1x Allen key 1x metal bracket 1x support leg...
Page 4
Product Information The support leg is used with ‘T18 Arc Dining Table’. The table is designed for indoor use and is tested according to EN 15372 - L2. Weight Materials Support leg: Lacquered solid wood 2,8kg Metal bracket: Powdercoated steel Fittings: Steel Tests &...
Page 6
Mount the metal bracket on the table slides using the four screws.
Page 7
Fit the support leg in the metal bracket. Slide the leg along the keyhole in the bracket by the groove in the leg.
Page 8
Adjust the adjustable glider until the bottom hit the fl oor.
Page 10
Recycling & Disassembly TAKT provides an ex- TAKT offers spare parts We hope that your TAKT tended warranty of 5 for ‘T18 Arc Dining Table’. product will serve you years on ‘T18 Arc Dining Spare parts are avail- well for many, many Table’.
Page 11
4x metal bracket (metal) 4x screws (metal) 1x support leg (wood) 1x adjustable glider (metal)