Advertisement
Quick Links
Advertisement
Related Manuals for TAKT T16
Summary of Contents for TAKT T16
- Page 1 Building Instructions...
- Page 2 Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force. 2x base frames...
- Page 3 1x backrest 4x screws (80 or 90mm) 4x washers 1x seat pad (optional) 2x screws (20mm) 2x metal collars 1x seat 4x screws (16mm) 1x footrest 1x Allen key (SW4) Flat-head screwdriver (not provided)
- Page 4 Product Information ‘T16 Cross Bar Chair’ is a bar chair designed for indoor use. The chair is tested according to EN-16139 - L1. Weight Materials Low version: Seat and back: Moulded plywood (oak and beech) 6,0 kg Frame: Solid oak...
- Page 5 Dimensions Low version 455 mm 444 mm High version 462 mm 451 mm...
- Page 6 Join the base components. Make sure the half moon marks align.
- Page 7 Optional If you are mounting an upholstred seat pad - place it on the wooden seat as showed here before mounting it on the metal frame.
- Page 8 Important! Turn all screws in sequence 1 to 4 - ONLY two rounds. Make sure the screw easily grips the thread.
- Page 9 Important! Turn all screws ONLY two rounds. Make sure the screw easily grips the thread.
- Page 10 Important! Turn all screws in sequence 1 to 4 - ONLY two rounds. Make sure the screw easily grips the thread. Note! Turn footrest so that pinhole mark is placed at the back towards the fl oor.
- Page 11 Push down on seat and tighten all screws...
- Page 13 Enjoy your new bar chair.
- Page 14 TAKT provides an ex- TAKT offers spare parts We hope that your TAKT tended warranty of 5 for ‘T16 Cross Bar Chair’. product will serve you well years on ‘T16 Cross Bar Spare parts are avail- for many, many years.
- Page 15 1x backrest (wood) 2x screws 20mm (metal) Optional 1x seat pad (mixed) 2x collars (metal) 1x wooden seat (wood) 4x washers (metal) 4x screws 80 or 90mm (metal) 4x screws 16mm 2x base frames (metal) (wood) 1x footrest (metal)
- Page 16 taktcph.com...