Page 2
Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force. 2x aprons 1x extension leaf...
Page 4
Product Information The extension leaf is used with ‘T18 Arc Dining Table’. The table is designed for indoor use and is tested according to EN 15372 - L2. Weight Materials Tabletop: Mdf with oak veneer or nano laminate narrow version:...
Page 7
Place the extension leaf on the table slides. Push the table ends together. Make sure the pin and pin holes align.
Page 8
Turn the table locks under the tabletop to secure the table.
Page 9
If the table is used with two 50 cm wide extension leaves, TAKT recommened to mount the table with a support leg (sold separately).
Page 10
Recycling & Disassembly TAKT provides an ex- TAKT offers spare parts We hope that your TAKT tended warranty of 5 for ‘T18 Arc Dining Table’. product will serve you years on ‘T18 Arc Dining Spare parts are avail- well for many, many Table’.