Page 2
Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force. 4x aprons 2x tabletops...
Page 3
2x table slides 16x screws (10mm) 8x wood dowels 28x screws (50mm) 8x connecting fi tting house 4x double bolt 8x pinol screws (12mm) 1x small Allen key (SW2,5) 2x leg frames 1x medium Allen key (SW4)
Page 4
Product Information ‘T18 Arc Dining Table’ is a table designed for indoor use. The table is tested according to EN 15372 - L2. Weight Materials Tabletop: mdf with oak veneer or nano laminate 39,2 kg Frame: Solid wood Surface treatment: Water based lacquer Fittings: Steel Tests &...
Page 8
Important! Turn all screws ONLY two rounds. Make sure the screw easily grips the thread. medium Allen key...
Page 9
Important! Mount the fi ttings in the sequence 1 to 3. Make sure that the threads in the connecting fi tting house are positioned outwards. Only tighten the pinol screws loosely. medium Allen key...
Page 10
Important! Make sure that the threads in the connecting fi tting house are positioned outwards, then place them in the holes and slide the leg frames into the double bolts.
Page 11
Important! Start by mounting all screws loosely. Make sure the screw easily grips the thread. Then tighten all screws. medium Allen key...
Page 14
Recycling & Disassembly TAKT provides an ex- TAKT offers spare parts We hope that your TAKT tended warranty of 5 for ‘T18 Arc Dining Table’. product will serve you years on ‘T18 Arc Dining Spare parts are avail- well for many, many Table’.