Page 2
Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force. 2x legs 1x seat...
Page 4
Product Information ‘T22 Turn Chair ’ is a chair designed for indoor use. The chair is tested according to EN 16139 - L1. Weight Materials Back frame: Molded plywood & laminated veneer 3,6 kg 3,8 kg with upholstery Legs: Laminated veneer...
Page 7
Important! Turn all screws ONLY two rounds. Make sure the screws easily grip the thread. Then tighten all screws.
Page 9
Start by mounting the dowel in the hole on one side. Then gently push the opposite leg outwards until the last dowel fi ts the second hole.
Page 10
Important! Turn all screws ONLY two rounds. Make sure the screws easily grip the thread. Then tighten all screws.
Page 11
Optional If you will place the chair on a hard surface (wooden fl oor, tile fl oor, etc.) you can mount the felt gliders to prevent friction. If you will stack Turn Chairs with wooden seats, mount the stacking gliders on the screws to prevent scratches.
Page 12
The chair is stackable up to three chairs. Place the seats vertically above each other while rotating the chairs. Make sure that the backrests do not overlap.
Page 14
TAKT offers spare parts We hope that your TAKT ed warranty of 5 years for ‘T22 Turn Chair’. product will serve you on ‘T22 Turn Chair’. The Spare parts are avail- well for many, many warranty covers breakage able from TAKT without years.