Advertisement
Quick Links
Advertisement
Related Manuals for TAKT T16 Cross
Summary of Contents for TAKT T16 Cross
- Page 1 Building Instructions...
- Page 2 Important Notice Only use the listed tools. Do not use power tools. Tighten in accordance with the building instructions. Avoid over-tightening. There is no need for strong force. 2x base frames...
- Page 3 1x backrest 1x screw (18mm) 4x screws (25 or 35mm) 1x seat pad (optional) 2x screws (20mm) 2x metal collars 4x screws (16mm) 1x seat 4x felt gliders 4x plast gliders 1x small Allen key (SW3) 1x footrest 1x medium Allen key (SW4) Flat-head screwdriver (not provided)
- Page 4 Product Information ‘T16 Cross Bar Chair Tube’ is a bar chair designed for indoor use. The chair is tested according to EN-16139 - L1. Weight Materials Low version: Seat and back: Moulded plywood (oak and beech) 6,0 kg Frame and footrest: Powder coated steel...
- Page 5 Dimensions Low version 447 mm 466 mm High version 455 mm 479 mm...
- Page 6 Small Allen key...
- Page 7 Optional If you are mounting an upholstred seat pad - place it on the wooden seat as showed here before mounting it on the metal frame.
- Page 8 Important! Turn all screws in sequence 1 to 4 - ONLY two rounds. Make sure the screw easily grips the thread. Small Allen key...
- Page 9 Important! Turn all screws ONLY two rounds. Make sure the screw easily grips the thread. Medium Allen key...
- Page 10 Important! Turn all screws in sequence 1 to 4 - ONLY two rounds. Make sure the screw easily grips the thread. Note! Turn footrest so that pinhole mark is placed at the back towards the fl oor. Small Allen key...
- Page 11 Push down on seat and tighten all screws...
- Page 12 The stool must be fi tted with either felt gliders for hard surfaces or plast glides for soft surfaces (carpets, etc.)
- Page 13 You can later exchange the glider by placing screwdriver in groove and push down...
- Page 14 Additional Information TAKT provides an extended warranty of 5 years on ‘T16 Cross Bar Chair Tube’. Warranty Spare Parts Recycling & Disassembly TAKT provides an ex- TAKT offers spare parts We hope that your TAKT tended warranty of 5 for ‘T16 Cross Bar Chair product will serve you well years on ‘T16 Cross Bar...
- Page 15 1x backrest (wood) 2x screws 20mm (metal) Optional 1x seat pad (mixed) 2x collars (metal) 1x wooden seat (wood) 4x screws 25 or 35mm (metal) 1x screw 18mm (metal) 4x screws 16mm (metal) 2x base frames (metal) 1x footrest (metal) 4x plast gliders or 4x felt gliders (plast)
- Page 16 taktcph.com...