Table of Contents
Advertisement
UDP6720 Series Digital Control Power Supply User's Manual
Quick Start
Apparance Inspection
1. Check out the instrument is in a good condition during the delivery. If there have any problem, please contact with
Uni-Trend Instrument Sale Department or the distributor.
2. Confirm whether the AC input voltage of UDP6720/UDP6721 comply with the standards of your country or region.
Notice: Use 110V/220V switch on the rear panel to select input voltage. After confirming the above matters, power on
the instrument.
Voltage Setup
1) Push
key to set voltage value;
or
2) Push
to select the specific numeric field;
3) Rotating
to enter the definited voltage parameter.
1
3
2
9
Advertisement
Table of Contents
