Table of Contents
Advertisement
UDP6720 Series Digital Control Power Supply User's Manual
OCP Function
1) Long pushk
key to set OVP function;
or
2) Push
to select the specific numeric field and enter OCP parameters;
3) Push
or
to enable OCP function;
4) When the OCP function set successfully, ☑ mark will shown beside OCP parameters.
Bepper Switch
1) Push
to enter the setup interface, rotate
to adjusting buzzer mode;
2) When the buzzer function is enable, keyboard sound is also turn on; when the buzzer function is disable, keuboard
sound will be silent. Buzzer status will shown on the top screen.
3) Push
to exit the setup page.
3
12
Advertisement
Table of Contents
