Table of Contents
Advertisement
Remote Control Interface & Operating Instructions
Device selection
Pause
Data acquisition
configuration
Power output display
OVP protection
Voltage/Current setup
ON/OFF
Memory group setup
List Mode (Time Function) and Delayer Mode
List Mode
List mode can setup multiple testing program, it can set 48 groups of independentant voltage, current and parameter of
output duration time.
Delayer Mode
Delayer mode can setup multiple testing program to control output status, which is set count to control output status is
on or off, and the time interval of switch can also set by point to point. Delayer mode can set 48 output status groups to
control parameter.
Output parameter of list/delayer mode can all store in internal storage. It has powerdown function. Storage space for
each group is 48
Operating Steps
1. Push power supply switch to turn on the instrument;
2. Turn on list mode/ delayer mode：
Push arrow key
or
Notice：
a.List/delayer mode and channel output function can't use at the same time, it can only choose either-or;
b.When List mode status is pause, delayer mode can't set parameter. It should enter setup interface of list mode to switch
to
, and the status is pause and then to set parameter;
Language Option
Quick set of voltage/current
OCP protection
Output record of voltage/current
to enter setup interface of list/delayer mode. It can be circular switch.
18
UDP6720 Series Digital Control Power Supply User's Manual
Operating interface
Advertisement
Table of Contents
