Page 4
Door thickness 30-38mm 39-46mm 47-54mm 7.5*7.5*56 7.5*7.5*64 7.5*7.5*72 PM4*20 PM4*30 PM4*40 KM4*25 KM4*35 KM4*45 KM3*5 Note: To ensure proper functioning of the device only use the mounting hardware package for your door thickness.
Door Preparation 1. Check the door thickness and prepare the corresponding mounting hardware package. Door Thickness H Spindle Length J Screw Length M Screw Length L Screw Length (mm) (mm) (mm) (mm) (mm) 30~38 39~46 47~54 2. Check door opening direction. Left inward Right inward Left outward...
Installation 1.Drill holes on the door. 2.Install the latch (D). centerlineofthe handle desired handle height Note Installing the mortise(D) on the door 1) Align the template along the vertical center line of the latch(D) at the desired handle height, and tape it to the door. by inserting screws(E).
Page 7
3.Install outdoor unit (B) with gasket (C) and spindle (H) on the door. 3.1 Put gasket (C) on outdoor 3.2 Insert spindle (H) into unit (B). the clutch. Clutch c orrect p osition: T he triangle Incorrect position must b e v ertically c entered.
Page 8
4.Install mounting plate (I) with gasket (C) on the door. 4.1 P ut m ounting p late (I) o n g asket(C). 4.2 I nserting s crews(J) t o s ecure t he o ut- door u nit. 5.Install indoor unit (K). 5.1 Connect the indoor unit (K) cable to the o utdoor unit (B).
6.Insert batteries. 7.Mark and drill holes for the strike. 2(mm) (10/127") 14(mm) (70/127") 21.5(mm) (215/254") 14(mm) (70/127") 35(mm) (1-48/127") 8. Test the lock by rotating the back handle and using the mechanical Key (A). Note: 1) When the door is locked and the clutch is idle, the front handle can be turned, but the door will remain locked.
Page 10
Change latch (D) direction. Remove screws from the latch trim panel with a Fix the latch trim panel by using screws. screwdriver and rotate the latch bolt at 180°. How To Use Key & Changing Handle Direction? Hexagon Screw How To Use Mechanical Key And Change Handle Direction? 2.
Page 11
Remarks 1. The default setting of the device allows ANY fingerprint to unlock. 2. Please register at least one administrator for the newly installed lock. Without administrator, no registration for any normal user is allowed. 3. The lock is equipped with mechanical keys for manually unlocking. Please keep the mechanical keys in a safe place.