Jumper Power Cords - Cisco MDS 9148V-K9 Hardware Installation Manual

Cable and Port Specifications
Locale
South Africa
Switzerland
Taiwan
United Kingdom
North America
Brazil

Jumper Power Cords

Jumper power cords have an IEC C15 connector on the outlet end of the cord and an IEC C14 connector on
the inlet end of the cord. This cord is compatible with IEC C13 outlet receptacles. This type of outlet receptacle
is commonly used for power distribution inside cabinets.
The following table lists the supported jumper power cords and power plugs for the switch.
Table 14: Supported Jumper Power Cords
Description
CAB-C13-C14-2M
Power Cord Part Source Plug
Number Type
CAB-9K10A-SA EL 208, SABS
164-1 (10 A)
CAB-9K10A-SW 12G SEV 1011
(10 A)
CAB-9K10A-TWN CNS 10917-2 &
CNS 690 (15A)
CAB-9K10A-UK BS89/13, BS
1363/A
(13 A;
replaceable fuse)
CAB-9K12A-NA NEMA 5-15P
plug (15 A)
CAB-250V-10A-BR NBR 14136
(10A)
Plug Type
IEC C14 (250 VAC 10
A)
Cisco MDS 9148V-K9 Switch Hardware Installation Guide
Length
5.12 ft (1.82 m)
8.2 ft (2.5 m)
13.12 ft (4 m)
8.2 ft (2.5 m)
8.2 ft (2.5 m)
7 ft (2.13 m)
Length Illustration
6.6 ft (2.0 m)
Jumper Power Cords
Power Plug Reference
Illustration
55