Cisco MDS 9148V-K9 Hardware Installation Manual page 35

Hide thumbs Also See for MDS 9148V-K9:

Table of Contents

Installing the Cisco MDS 9148V-K9 Switch

Installing the Switch into a 2-Post Rack

Figure 11: Installing the Switch onto the 2-Post Rack From the Front Side of the Chassis

Figure 12: Installing the Switch onto the 2-Post Rack From the Rear Side of the Chassis

c. Tighten the 10-32 screws to 20 in-lb (2.26 N.m) or tighten the 12-24 screws to 30 in-lb (3.39 N.m).

Cisco MDS 9148V-K9 Switch Hardware Installation Guide

Table of Contents

Mds 9000 series