Updating Firmware
The FJ-X3 Wireless Trigger is designed with a USB-C port to allow
for firmware updates and charging. Future firmware updates may
result in performance enhancements and modified menu options.
The FJ-X3's firmware version is displayed on the start-up screen.
Please visit fjwestcott.com/firmware to update your FJ-X3 to
the latest firmware. Follow the instructions included with the
firmware download to update.
IMPORTANT
• If the FJ-X3 doesn't display as an external device after connecting to a computer,
disconnect the USB cable from both devices and restart the computer and firmware
update process.
• It's recommended that the firmware update installation process be completed only
when the connected computer's power level is ≥ 25%. Loss of power of any type during
this process could render the FJ-X3 inoperable and require professional repair.
• Removing the USB cable from the FJ-X3 without properly ejecting the device from your
computer could render the trigger inoperable and require professional repair.
• Copying the firmware from your computer to the FJ-X3 may take a few minutes and/or
halt the copying process. Should this happen, close the copy progress window and try
again. Further copying issues may require the computer to be restarted.