Preparing Your Camera - Westcott FJ-X3 Quick Start Manual

Introduction
This guide covers setup, controls, and basic operation.
Visit fjwestcott.com/documentation and scroll to the
FJ-X3 section to download the complete User Manual.
Warning
• Keep away from fire, water, and moisture. Do not submerge in water.
• Avoid drastic temperature changes before, during, and/or after use.
• Do not over-tighten shoe lock wheel when mounting to camera.
• Ensure the FJ-X3 is securely mounted before use.
• Surrounding RF interference may affect the communication performance of the FJ-X3.
• Do not attempt to modify any Westcott products. Contact Westcott for assistance.
• The maximum operating temperature is 14-104°F (-10-40°C).

Preparing Your Camera

An FJ-X3 Wireless Trigger is compatible with various camera models to operate the
FJ Wireless flashes. Each camera model has a different approach to how it interacts
with off-camera lights. A few adjustments to your camera settings may be required.
Below are a few settings to check out first. We recommend referring your camera's
user manual for details specific to your camera brand and model.
• Set Silent Shutter to OFF.
• Set E-Front Curtain to OFF.
• Set Wireless Mode to ON or OFF (camera brand/model dependent).
• Set Red-Eye Reduction to ON or OFF (camera brand/model dependent).
• Set Exposure Compensation to 0 (zero) in camera.
• Set White Balance to Daylight, 5500K, or Custom at 5500K (not Auto).
• Various camera models require you to set the Sync type (Front Curtain, Rear Curtain,
HSS) manually in the camera's Flash Menu before the FJ-X3 Sync can be adjusted.
• Various camera models automatically adjust the Sync setting to HSS when HSS is
enabled in the camera settings and the native sync speed is exceeded.
• Ensure the camera's battery level is above 25%.
• Ensure the camera contacts are clean and the FJ-X3 is seated properly and aligned.