Setting A Reference Point; Projecting A Waypoint; Navigating To A Destination - Garmin Tactix Delta Owner's Manual

Setting a Reference Point

You can set a reference point to provide the heading and distance to a location or bearing.
1 Select an option:
• Hold LIGHT.
TIP: You can set a reference point while you are recording an activity.
• From the watch face, press START.
2 Select Reference Point.
3 Wait while the watch locates satellites.
4 Press START, and select Add Point.
5 Select a location or bearing to use as a reference point for navigation.
The compass arrow and distance to your destination appear.
6 Point the top of the watch toward your heading.
When you deviate from the heading, the compass displays the direction from the heading and degree of
deviation.
7 If necessary, press START, and select Change Point to set a different reference point.

Projecting a Waypoint

You can create a new location by projecting the distance and bearing from your current location to a new
location.
NOTE: You may need to add the Project Wpt. app to the activities and apps list.
1 From the watch face, press START.
2 Select Project Wpt..
3 Press UP or DOWN to set the heading.
4 Press START.
5 Press DOWN to select a unit of measure.
6 Press UP to enter the distance.
7 Press START to save.
The projected waypoint is saved with a default name.

Navigating to a Destination

You can use your device to navigate to a destination or follow a course.
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation.
5 Select a category.
6 Respond to the on-screen prompts to choose a destination.
7 Select Go To.
Navigation information appears.
8 Press START to begin navigation.
78 Navigation