Creating A Round-Trip Course; Creating A Course On Garmin Connect; Sending A Course To Your Device - Garmin Tactix Delta Owner's Manual

Creating a Round-Trip Course

The device can create a round-trip course based on a specified distance and direction of navigation.
1 From the watch face, press START.
2 Select Run or Bike.
3 Hold MENU.
4 Select Navigation > Round-Trip Course.
5 Enter the total distance for the course.
6 Select a direction heading.
The device creates up to three courses. You can press DOWN to view the courses.
7 Press START to select a course.
8 Select an option:
• To begin navigation, select Go.
• To view the course on the map and pan or zoom the map, select Map.
• To view a list of turns in the course, select Turn By Turn.
• To view an elevation plot of the course, select Elevation Plot.
• To save the course, select Save.
• To view a list of ascents in the course, select View Climbs.

Creating a Course on Garmin Connect

Before you can create a course on the Garmin Connect app, you must have a Garmin Connect account
Connect, page 36).
1 From the Garmin Connect app, select
2 Select Training > Courses > Create Course.
3 Select a course type.
4 Follow the on-screen instructions.
5 Select Done.
NOTE: You can send this course to your device

Sending a Course to Your Device

You can send a course you created using the Garmin Connect app to your device
Connect, page 80).
1 From the Garmin Connect app, select
2 Select Training > Courses.
3 Select a course.
4 Select > Send to Device.
5 Select your compatible device.
6 Follow the on-screen instructions.
80
or .
(Sending a Course to Your Device,
or .
(Garmin
page 80).
(Creating a Course on Garmin
Navigation