Table of Contents
Advertisement
The CSL Elite Pedals V2 must not be modified in any way, other than what is
explicitly described in this manual. Endor
utilisation of the electronics, hardware, software, and firmware contained in this
device. In case difficulties occur when using your CSL Elite Pedals V2, please
use the following troubleshooting guide. You will find further details and contact
information on Fanatec.com/support/faq.
If the CSL Elite Pedals V2 is not working properly:
Problem description
The PC driver or the wheel base does not
recognise the CSL Elite Pedals V2.
After
performing
Elite Pedals V2,
positions are reset.
19
TROUBLESHOOTING
6
a firmware update of the
the manually calibrated pedal
AG expressly prohibits analysis and
®
Solution
Ensure that you have updated your wheel base
and CSL Elite Pedals V2 firmware to the latest
firmware version contained within the latest PC
driver which can be downloaded from
com/driver.
Ensure that you are using the RJ12 cable
included with your CSL Elite Pedals V2 package.
Ensure that the RJ12 cables are plugged in the
correct ports of the CSL Elite Pedals V2 and the
correct port of the wheel base. See section 4.6
'Connections'
Ensure that the RJ12 and USB cables are
plugged in simultaneously. See section 4.6
'Connections'
After performing a firmware update of the CSL
CSL
Elite Pedals V2, the manually calibrated pedal
positions have to be manually calibrated again.
See section 4.7 'Tuning Options', 'Manual Mode'
fanatec.
Advertisement
Table of Contents
