Table of Contents
Advertisement
Problem description
Pedal signal of the CSL Elite Pedals V2 in-game
behaviour feels incorrect.
After startup the
signals are not correctly indicated; behaviour
can be verified in the
Your PC does not boot when the
is connected via USB before
Pedals V2
Windows has booted.
How can I get in contact with Fanatec customer
support?
20
pedal
CSL Elite Pedals V2
Fanatec Control Panel
CSL Elite
Solution
Connect the CSL Elite Pedals V2 to a PC or a
wheel base. Start the Fanatec Control Panel
and check the indicator bars of each pedal while
pressing each corresponding pedal. You may
need to do a manual calibration of minimum and
/ or maximum positions or reselect
Mode'
to adjust the pedal signal behaviour as
desired.
When powering ON the
without 'Manual Mode' selected, every pedal
lever must first be pressed to the maximum
position and then back to the minimum
.
position. This completes the auto-calibration.
See section 4.7 "Tuning Options", "Manual Mode"
This phenomenon is related to some main board
manufacturers' BIOS. In this case, it is required
to boot the PC first and then connect the CSL
Elite Pedals V2 via USB.
You can create a Support Ticket via the 'My
Products' section of your Fanatec account at
Fanatec.com
'...Manual
CSL Elite Pedals V2
Advertisement
Table of Contents
