Special Features Of Your Oven Control; Fahrenheit Or Celsius Temperature Selection - GE PT925SNSS - Profile 30" SC Convection Ovens Owner's Manual

Ge profile 30" built-in single/double convection wall oven
Hide thumbs Also See for PT925SNSS - Profile 30" SC Convection Ovens:
Table of Contents

Advertisement

Available languages

Available languages

Special features of your oven control.

Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control's memory until the steps are repeated.
To enter a special feature for either oven, you must first touch the upper oven BROIL HI/LO and BAKE pads
at the same time. The lower oven BROIL HI/LO and BAKE pads will not activate special features.
When the display shows your choice, touch the START pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
+
+
+
+
22
Help Function
Touch this pad to get additional
information on the keypad of your choice.
Touch the HELP pad and the display will
show "Press keypad for help on that
feature or 1 for options."
12-Hour Shutdown
With this feature, should you forget
and leave the oven on, the control will
automatically turn off the oven after
12 hours during baking functions
or after 3 hours during a broil function.
If you wish to turn OFF this feature,
follow the steps below.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.

Fahrenheit or Celsius Temperature Selection

Your oven control is set to use
the Fahrenheit temperature selections,
but you may change this to use the Celsius
selections.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time
until the display shows SF.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps
will sound followed by one beep every
6 seconds until the CLEAR/OFF pad is
touched. This continual 6-second beep
may be canceled.
To cancel the 6-second beep:
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
The options on pages 22 and 23 can
be adjusted using the method described
here or through HELP.
Touch the DELAY START pad until
no shdn (no shut-off) appears
in the display.
Touch the START pad to activate
the no shut-off and leave the control
set in this special features mode.
Touch the COOK TIME and BROIL
HI/LO pads at the same time.
The display will show F (Fahrenheit).
Touch the COOK TIME and BROIL
HI/LO pads again at the same time.
The display will show C (Celsius).
Touch the START pad.
Touch the BROIL pad. The display
shows CONTI BEEP (continuous beep).
Touch the BROIL pad again.
The display shows SINGLE BEEP.
(This cancels the one beep every
6 seconds.)
Touch the START pad.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt925dnbbProfile pt925dnPt925

Table of Contents